Comparison Terms |
TTPHIL Technique |
Single Piece Basal Implants ( BCS/KOS) |
CONVENTIONAL |
Number of
visits |
Single 2-day visit to Hyderabad, India. CAD CAP Ceramic or Zirconia with
screw access holes. ( Depends on case to case)
Inhouse CBCT facility to do precise Flapless 3DGuided
Surgery |
Permanent teeth in 3 Days? . Not always. First visit with metal acrylic teeth and
later ceramic or Zirconia after few months. These polished basal implants take long time to Integrate? Does it Integrate is
a million dollar question? Forced to load even if you dont get predictable primary stability. |
2 visits or Single visit. First visit for taking CT to prepare surgical guide. 2nd visit after 4 to 6
weeks for permanent teeth. |
Cost of implant procedure |
Affordable dental implant procedure. Customized CAD-CAM, CAD-CAP designed screw access abutments and
Zirconia or CAD-CAM PFM crowns.
we do not recommend cemntable bridge for full mouth prosthesis. |
Abutments come with implants. Cheap because it’s acrylic or cemented bridge. Repairs are very
expensive. Have to change the whole prosthesis since its cemented. |
Expensive depending
on prosthesis chosen. because of CT scan and surgical guide preparation and multiple visits. |
Type of prosthesis |
Ceramic or Zirconia. The lab
prepares in 1-2 days depends on case with CAD-CAM technology. Precise dental crown and bridges fabricated. We recommend
zirconia if we have strong metal base like malo bridge. Zirconia do not have strength so can break in long term. |
Mostly Metal Acrylic or Composite sometimes Ceramic or zirconia. No CAD CAM abutments
possible.Tissue Colapse. Hence esthetics compromised. Metal ceramic Zirconia also given but no use because they have to be
cut and repeated. |
Acrylic/plastic- After 3 months replaced with Ceramic or
Zirconia |
Type of implants |
Active
design implants with a combination of basal and pterygoid for immediate loading, no screw loosening because of Q-lock Morse
connection(aircraft technology) |
Combination of Single piece Implants, Basal Implants, and Pterygoid Implants
are used. No screw loosening and no crestal bone loss. |
Screw based implants used. Screw
loosening is a problem |
Temporary crown |
CAD-CAM Temporaries are given on day of implant placement. |
Given on day of implant
placement Only manually possible because of direct impressions. |
Given on day of implant
placement. Only manually done. |
Permanent crown |
Given on the 2nd day |
Given on 3rd day |
Given after 2-3 months |
Surgical
technique |
Done with surgical template. Hence more precise. Tall and Tilted implants
increasing the surface area for better osseointegration. |
Thin and narrow implants, Surface
area of implants very less compared to TTPHIL Active design implants. |
Non Active design |
Implants used |
Active (Germany) |
Switzerland |
Yes |
FDA
approval |
Yes |
No |
Yes |
Screw loosening |
No because
of Q lock Morse connection abutments used. |
No because implant comes with abutment |
Yes. Chances are there. |
Bone grafting |
No because Tall and Tilted implants are used to bypass sinus walls or nerves. |
No. Small implants are used. Longevity questionable? |
Bone grafting done |
Cantilevers |
No because Tilted implants and
Pterygoid implants are placed. |
No. |
No- Sinus Lifting is done
but waiting time for 3 to 6 months |
Relative risk of failure |
No risk, lifetime warranty ( more than 4000 implants are placed for immediate loading) |
Smaller implants used hence less chance of integration |
Smaller implants
are placed. Waiting period for 3 to 6 months |